Hi everyone, I am happy to be here today as one of the Official Supporter's for Dailylike Canada's Fall program. Not only do I love the simplicity of Dailylike Canada's fabric, but their nature and animal designs are down right adorable.
Today, I am sharing a cotton canvas storage bin in the cutest CACTUS fabric around.
Over the years, I have shared many storage bin tutorials. This one is super easy to make and I promise after you make one bin, you will be hooked! I love making fabric bins as you can stash all sorts of goodies in them - mail, make-up, office supplies, toys, stuffed animals, diapers, doo-dads, socks.. The list goes on and on.
I have 2 boys - a 5 year old and an 18 month old. Most of the time, I feel like all I do is chase them around and clean up their messes. These bins are perfect for all their stuff!
A few things to consider before we get started:
Step 1 - Cut the fabric: Cut 2 circles: Cut 1 circle with the 10"diameter from the outside fabric. Cut 1 circle with a 9 7/8" diameter from the lining fabric. Cut 2 rectangles: Cut 1 rectangle 29" L x 9" H from the outside fabric. Cut 1 rectangle 28 7/8"L x 8 1/2" H from the lining fabric.
Step 2 - Cut and fuse the interfacing pieces: Fuse each piece to the backside of the canvas fabric.
Step 3 - Create notches: Fold the circle in half and then fold in half again. Mark or cut a notch at the outside edge / fold of each section. These 4 notches will help with placement and sewing the base to the storage bin side. Repeat for the lining. Next fold the rectangles in half and sew the short sides together with a 1/2" seam allowance. Press the seam. Open the seam allowance and press again. Repeat for the lining.
Step 4 - Similar to the circle base, mark 4 notches along one edge of the rectangle/side. If you have a directional print, make note of it at this time. Fold in half matching the short ends and then fold in half again. Mark or cut a notch at the fold of each of the 4 sections. Repeat for the lining.
Step 5 - Create the bin: With right sides together, match the notches of the circle base to the notches of the rectangle/side piece. Pin at each of the 4 notches. Place a few more pins between each notch, making sure the fabric placement is even. Place into your sewing machine and sew the pieces together with a 1/2" seam allowance. Note - Place the fabric with the most gathers nearest to the feed dogs. The feed dogs will help pull this area through the machine and even them out. Press the seam. Repeat for the lining.
Step 6 - Carefully trim the base seam allowances to 1/4". Press. Next, turn the outside fabric bin to be right side facing out. Turn down/ fold under the outside top edge 1/4". Press. Repeat and turn and fold 1/4" again. Press. Make sure to turn and fold evenly, otherwise you will have a very wavy top edge.
Step 7 - Finish the bin: Place the lining bin into the outside bin and match at the side seams. Tuck the lining top edge under the folded outside top edge. Wiggle and smooth the bottom seams into place. Pin or use wonder clips to hold. Topstitch around the top edge.